ESD Combo Tester, CT-01

The Wrist strap Cum Dual Footwear tester is a jig type arrangement
to test the validity of ESD Wrist strap & foot wears. The instrument
measures Independent test simultaneously for right foot, left foot and
wrist strap at the same time. Other Footwear testers can only measure
two foot at a time, or the combined resistance of both foot. The wrist
strap cum Dual Foot Tester reduces the testing time by half, and
offers the operator a visual and audible measurement of Pass or fail
of both foot and wrist strap before entering the EPA.
Operation Operation of Wrist Strap:
Connect the wrist strap cord to
the instrument with the strap
on the wrist; press gently on
the metal sensor of the wrist
strap tester. The instrument
comes on automatically when
this is done. The operator can
check whether the resistance
of the wrist strap falls within
the acceptable range (0.75 to
10 Meg ohms), This is
indicated by green (pass) LED
lighting up.

Operation of foot wears:
Simply stand on the two stainless steel footprints on the foot plate and
push the Dual foot wear tester press to test button. The instrument
comes on automatically when this is done. The operator can check
whether the resistance of the Foot wears falls within the acceptable
range of 0.75 to 35/100 Meg ohms, this is indicated by green (pass)
LED lighting up.
CT-01 Specifications:
Wrist Strap PASS Range : 0.75 to 10 Meg Ohms
Foot Wears PASS Range : 0.75 to 35 Meg ohms
Indications : Pass – GREEN LED
Below 0.75M LOW fail – RED LED
for both Wrist Strap & Foot wear
Above 10M High Fail – RED LED
For Wrist Strap
Above 35M High Fail – RED LED
for Footwear
with Buzzer Sound
Test actuation : By pressing metal sensor plates
Accuracy : +/- 10%
Power supply : 9 Volt Battery
Battery Status : By Dual Color LED.
Dimensions : Instrument: 190 x 110 x 50 mm
Foot plate: 470 x 360 mm
Height: 1000 mm
Weight : 5 Kg
Calibration : Recommended every 12 months
Warranty : 12 Months only for Instrument
BRAND : globalss.in